ios蓝牙开发（三）app作为外设被连接的实现

再上1节说了app作为central连接peripheral的情况，这1节介绍如何使用app发布1个peripheral，给其他的central连接

还是这张图，central模式用的都是左侧的类，而peripheral模式用的是右侧的类

peripheral模式的流程

1. 打开peripheralManager，设置peripheralManager的拜托
2. 创建characteristics，characteristics的description 创建service，把characteristics添加到service中，再把service添加到peripheralManager中
3. 开启广播advertising
4. 对central的操作进行响应
    - 4.1 读characteristics要求
    - 4.2 写characteristics要求
    - 4.4 定阅和取消定阅characteristics

准备环境

  1 xcode
  2 开发证书和手机（蓝牙程序需要使用使用真机调试，使用摹拟器也能够调试，但是方法很蛋疼，我会放在最后说），如果不行可使用osx程序调试
  3 蓝牙外设

实现步骤

1. 打开peripheralManager，设置peripheralManager的拜托

设置当前ViewController实现CBPeripheralManagerDelegate拜托

    @interface BePeripheralViewController : UIViewController<CBPeripheralManagerDelegate>

初始化peripheralManager

     /*
     和CBCentralManager类似，蓝牙装备打开需要1定时间，打开成功后会进入拜托方法
     - (void)peripheralManagerDidUpdateState:(CBPeripheralManager *)peripheral;
     摹拟器永久也不会得CBPeripheralManagerStatePoweredOn状态
     */
    peripheralManager = [[CBPeripheralManager alloc]initWithDelegate:self queue:nil];

2. 创建characteristics，characteristics的description ，创建service，把characteristics添加到service中，再把service添加到peripheralManager中

在拜托方法 - (void)peripheralManagerDidUpdateState:(CBPeripheralManager *)peripheral中，当peripheral成功打开后，才可以配置service和characteristics。这里创建的service和chara对象是CBMutableCharacteristic和CBMutableService。他们的区分就像NSArray和NSMutableArray区分类似。我们先创建characteristics和description，description是characteristics的描写，描写分很多种，这里不细说了，经常使用的就是CBUUIDCharacteristicUserDescriptionString。

//peripheralManager状态改变
- (void)peripheralManagerDidUpdateState:(CBPeripheralManager *)peripheral{
    switch (peripheral.state) {
            //在这里判断蓝牙设别的状态  当开启了则可调用  setUp方法(自定义)
        case CBPeripheralManagerStatePoweredOn:
            NSLog(@"powered on");
            [info setText:[NSString stringWithFormat:@"装备名%@已打开，可使用center进行连接",LocalNameKey]];
            [self setUp];
            break;
        case CBPeripheralManagerStatePoweredOff:
            NSLog(@"powered off");
            [info setText:@"powered off"];
            break;

        default:
            break;
    }
}

 //配置bluetooch的
 -(void)setUp{

        //characteristics字段描写
        CBUUID *CBUUIDCharacteristicUserDescriptionStringUUID = [CBUUID UUIDWithString:CBUUIDCharacteristicUserDescriptionString];

        /*
         可以通知的Characteristic
         properties：CBCharacteristicPropertyNotify
         permissions CBAttributePermissionsReadable
         */
        CBMutableCharacteristic *notiyCharacteristic = [[CBMutableCharacteristic alloc]initWithType:[CBUUID UUIDWithString:notiyCharacteristicUUID] properties:CBCharacteristicPropertyNotify value:nil permissions:CBAttributePermissionsReadable];

        /*
         可读写的characteristics
         properties：CBCharacteristicPropertyWrite | CBCharacteristicPropertyRead
         permissions CBAttributePermissionsReadable | CBAttributePermissionsWriteable
         */
        CBMutableCharacteristic *readwriteCharacteristic = [[CBMutableCharacteristic alloc]initWithType:[CBUUID UUIDWithString:readwriteCharacteristicUUID] properties:CBCharacteristicPropertyWrite | CBCharacteristicPropertyRead value:nil permissions:CBAttributePermissionsReadable | CBAttributePermissionsWriteable];
        //设置description
        CBMutableDescriptor *readwriteCharacteristicDescription1 = [[CBMutableDescriptor alloc]initWithType: CBUUIDCharacteristicUserDescriptionStringUUID value:@"name"];
        [readwriteCharacteristic setDescriptors:@[readwriteCharacteristicDescription1]];


        /*
         只读的Characteristic
         properties：CBCharacteristicPropertyRead
         permissions CBAttributePermissionsReadable
         */
        CBMutableCharacteristic *readCharacteristic = [[CBMutableCharacteristic alloc]initWithType:[CBUUID UUIDWithString:readCharacteristicUUID] properties:CBCharacteristicPropertyRead value:nil permissions:CBAttributePermissionsReadable];


        //service1初始化并加入两个characteristics
        CBMutableService *service1 = [[CBMutableService alloc]initWithType:[CBUUID UUIDWithString:ServiceUUID1] primary:YES];
        [service1 setCharacteristics:@[notiyCharacteristic,readwriteCharacteristic]];

        //service2初始化并加入1个characteristics
        CBMutableService *service2 = [[CBMutableService alloc]initWithType:[CBUUID UUIDWithString:ServiceUUID2] primary:YES];
        [service2 setCharacteristics:@[readCharacteristic]];

        //添加后就会调用代理的- (void)peripheralManager:(CBPeripheralManager *)peripheral didAddService:(CBService *)service error:(NSError *)error
        [peripheralManager addService:service1];
        [peripheralManager addService:service2];
 }

3. 开启广播advertising

//perihpheral添加了service
- (void)peripheralManager:(CBPeripheralManager *)peripheral didAddService:(CBService *)service error:(NSError *)error{
    if (error == nil) {
        serviceNum++;
    }

    //由于我们添加了2个服务，所以想两次都添加完成后才去发送广播
    if (serviceNum==2) {
        //添加服务后可以在此向外界发出通告 调用完这个方法后会调用代理的
        //(void)peripheralManagerDidStartAdvertising:(CBPeripheralManager *)peripheral error:(NSError *)error
        [peripheralManager startAdvertising:@{
                                              CBAdvertisementDataServiceUUIDsKey : @[[CBUUID UUIDWithString:ServiceUUID1],[CBUUID UUIDWithString:ServiceUUID2]],
                                              CBAdvertisementDataLocalNameKey : LocalNameKey
                                             }
         ];

    }

}

//peripheral开始发送advertising
- (void)peripheralManagerDidStartAdvertising:(CBPeripheralManager *)peripheral error:(NSError *)error{
    NSLog(@"in peripheralManagerDidStartAdvertisiong");
}

4. 对central的操作进行响应

- 4.1 读characteristics要求
- 4.2 写characteristics要求
- 4.3 定阅和取消定阅characteristics

//定阅characteristics
-(void)peripheralManager:(CBPeripheralManager *)peripheral central:(CBCentral *)central didSubscribeToCharacteristic:(CBCharacteristic *)characteristic{
    NSLog(@"定阅了 %@的数据",characteristic.UUID);
    //每秒履行1次给主装备发送1个当前时间的秒数
    timer = [NSTimer scheduledTimerWithTimeInterval:1 target:self selector:@selector(sendData:) userInfo:characteristic  repeats:YES];
}

//取消定阅characteristics
-(void)peripheralManager:(CBPeripheralManager *)peripheral central:(CBCentral *)central didUnsubscribeFromCharacteristic:(CBCharacteristic *)characteristic{
    NSLog(@"取消定阅 %@的数据",characteristic.UUID);
    //取消回应
    [timer invalidate];
}

//发送数据，发送当前时间的秒数
-(BOOL)sendData:(NSTimer *)t {
    CBMutableCharacteristic *characteristic = t.userInfo;
    NSDateFormatter *dft = [[NSDateFormatter alloc]init];
    [dft setDateFormat:@"ss"];
    NSLog(@"%@",[dft stringFromDate:[NSDate date]]);

    //履行回应Central通知数据
    return  [peripheralManager updateValue:[[dft stringFromDate:[NSDate date]] dataUsingEncoding:NSUTF8StringEncoding] forCharacteristic:(CBMutableCharacteristic *)characteristic onSubscribedCentrals:nil];

}


//读characteristics要求
- (void)peripheralManager:(CBPeripheralManager *)peripheral didReceiveReadRequest:(CBATTRequest *)request{
    NSLog(@"didReceiveReadRequest");
    //判断是不是有读数据的权限
    if (request.characteristic.properties & CBCharacteristicPropertyRead) {
        NSData *data = request.characteristic.value;
        [request setValue:data];
        //对要求作出成功响应
        [peripheralManager respondToRequest:request withResult:CBATTErrorSuccess];
    }else{
        [peripheralManager respondToRequest:request withResult:CBATTErrorWriteNotPermitted];
    }
}


//写characteristics要求
- (void)peripheralManager:(CBPeripheralManager *)peripheral didReceiveWriteRequests:(NSArray *)requests{
    NSLog(@"didReceiveWriteRequests");
    CBATTRequest *request = requests[0];

    //判断是不是有写数据的权限
    if (request.characteristic.properties & CBCharacteristicPropertyWrite) {
        //需要转换成CBMutableCharacteristic对象才能进行写值
        CBMutableCharacteristic *c =(CBMutableCharacteristic *)request.characteristic;
        c.value = request.value;
        [peripheralManager respondToRequest:request withResult:CBATTErrorSuccess];
    }else{
        [peripheralManager respondToRequest:request withResult:CBATTErrorWriteNotPermitted];
    }


}

代码下载:

我博客中大部份示例代码都上传到了github，地址是：https://github.com/coolnameismy/demo，点击跳转代码下载地址

本文代码寄存目录是BleDemo

生活不易，码农辛苦
如果您觉得本网站对您的学习有所帮助,可以手机扫描二维码进行捐赠